Copper Bonded Rod

99.95% pure electrolytic grade copper is molecularly bonded to nickel-sealed low carbon steel core having high tensile strength. nickel sealing is done for good adhesion and copper coating will not crack when bent or driven. No part of steel is exposed since copper coating is done after all fabrication. The standard copper coating thickness is 250/100 microns.

Key Features

• Fast Dissipation of Fault Current.
• No joints beneath the soil as in Plate Electrodes.
• Good Corrosion Resistance than Cast Iron/Hot Dip GI Electrodes.
• Superior Electrical, Mechanical and Thermal Properties (IEEE837)

Certifications:

IEC 62561-2:2018 Lightning Protection System Components- Part2: Requirements for Conductors and Earth Electrodes (TC No.:C2/0000032498, D211105006/D211105006-10)

• Adhesion Test
• Bend Test
• Electrical Resistivity Test
• Tensile Strength
• Yield/Tensile Ratio
• Coating Thickness Test
• Environmental Test

ISI Marked [IS 1772] : Electroplated Coatings of Copper (CM/L : 6400125807)

• Thickness of Copper Coating
• Corrosion Resistance Test- Copper Accelerated Acetic Acid Salt Spray
• Adhesion Test

Short Circuit Current Tested from Central Power Research Institute Bangalore (TC No.: SC15357B, SC15357A)

ASTM B499:2014- Measurement of Copper Coating Thickness (TC No.: ML/23835/4/20-21)

Registered office & Warehouse

Yellow Gold Energy Pvt.Ltd.
16/1A, 16/1B, Sothupakkam Salai
Redhills, Chennai, Tamil Nadu 600 052

Contact Numbers

+91 98807 03083
+91 86602 14970
+91 90361 03083

Emails

info@yellowgoldenergy.com
sales.tn@yellowgoldenergy.com
marketing@yellowgoldenergy.com

© Copyright 2024 | Yellow Gold Energy | All Rights Reserved

Legal Disclaimer

TOP